45° SAE Inverted Flare Fitting Description

45° SAE Inverted Flare Fittings are part of the range of fluid connectors. The design is semi bend with 45 degree angle, and the cone angle is 45 degrees. These fittings are suitable for refrigerant, brake and fuel lines in air conditioning, marine, mobile and engine applications. Moreover, they are resistance to vibration, and perfect for applications with high vibration. The hose fitting tail which is narrower and has indentations inserts into the hose. As a result of the indentations the fitting tights securely in its place within the hose. The male thread end also inserts into the secondary fittings. Creating a tight leak-proof connection. 45° SAE inverted flare hose fittings are classified as fixed hydraulic fittings.

SAE hose fittings acronym stands for the Society of Automotive Engineers that originally manufacture across America. They are extensively useful across multiple industries globally. But their main application is in transportation industries such as Automotive and airplane industries.

Selection

45° Inverted Flare hose fittings hose fittings come in a wide variety of sizes. Based on the pipe and hose sizes, you can choose the most appropriate hose fittings. Different sizes of the fitting are available in the information table. You must consider that all hydraulic hose fittings might seem the same, but what makes them different from each other is the angle. The cone angle and the threads per inch set fittings apart. For instance, this male hydraulic hose fitting cone angle is 45 degrees. While installing the SAE hose fitting size must be chosen carefully for creating leak-proof tight and precise connections. You can also contact the supplier or the manufacturer of this product for consultation.

Safety Tips

To achieve leak-proof tight connections it’s crucial to pay close attention to a precise installation. Especially in situations where dangerous fluids like Acid, flammable fluids, toxic and, other hazardous fluid are being conveyed. Carefully consider the following point for the installation and maintenance of the fitting.

1. To install this product, you have to employ experienced skilled workers to make to connection in the best possible way without taking the risk for any dangerous situation.
2. Never loosen or tighten the fitting while the system is under pressure.
3. Never allow the system temperature to go beyond the recommended temperature in the product catalog.
4. Always note that the pipe bend shouldn’t be too close to the fittings. Otherwise, there is a potential risk for a leak.
5. While using the product for hazardous chemicals and toxic fluid delivery, safety tips must be followed very strictly.
6. Always select a proper size hose that is a complete fit for the fittings.