24291T ORFS ZŁĄCZE ŻEŃSKIE 90stopni

24291T ORFS ZŁĄCZE ŻEŃSKIE 90stopni

24291T ORFS FEMALE 90 DEG FITTING 

ORFS Fittings that stand for the O-ring face seal fittings are part of the range of fluid connectors meeting or exceeding the strict requirements of SAE J1453 and ISO 8434-3. They eliminates leakage problem commonly seen in hydraulic systems.

ORFS Hose Fittings Description

ORFS Hose Fittings that stand for the O-ring face seal fittings are part of the range of fluid connectors meeting or exceeding the strict requirements of SAE J1453 and ISO 8434-3. They eliminates leakage problem commonly seen in hydraulic systems experiencing higher operating pressures and more severe mechanical shocks. Moreover, Under over-tightening, any ­fitting can allow leakage. Metal fittings are more susceptible to leakage because they must tighten to a higher and narrower torque range. Therefore thus makes it easier to strip threads or crack or distort ­fitting components, which prevents proper sealing. As the name implies for its key feature, the ORFS fitting utilizes an O-ring that provides a more reliable seal than traditional metal-to-metal tube fitting styles. Sealing takes place by compressing the O-ring onto the flat face of the female connector. 

ORFS Fittings Features

1.  Zero clearance for easy plumbing.
2. Resistance to over-torquing/eliminated damage from over-tightening.
3. Vibration resistance/reduced loosening caused by system vibration.
4. The flat face and elastomeric seal for unlimited re-usability.

   Applications

   Hydraulic hose fittings connect hoses to pumps, valves, cylinders, and other components used throughout a hydraulic system. These fittings secure connections help contain and direct the flow of hydraulic fluid to where required while preventing leaks and safely maintaining pressure. ORFS Hose Fittings are suitable for a wide range of applications where higher pressures, vibration and impulse are prevalent. They are also useful across many industries such as:

   1. Industrial Hydraulics;
   2. Mobile Hydraulics;
   3. Marine Hydraulics;
   4. Mining Industry;

      Installation

      1. Inspect for possible contamination as well as damage from shipping or handling. Confirm face seal O-ring is properly installed.
      2. Lubricate the threads and the O-ring with your systems hydraulic fluid or a light lubricant.
      3. Align mating face seal flange against O-ring and ­tighten face seal flange nut manually.
      4. Finally, torque Flange nut.

      ORFS Fitting comes in a variety of styles, shapes, and sizes and works on high-pressure hydraulic applications. Our ORFS Fittings are also available in one piece straight, male & female, 45°, and 90° with swivel nuts and o-ring seal. You can check other ORFS Hose Fittings for more details.